SMA M RA RG .86 SOLDER

Preparation:

Strip the Cable: Carefully strip the RG-86 cable to expose the central conductor and the shield. Ensure that you do not damage the dielectric material or the conductors.
Prepare the Connector: The SMA right-angle connector typically consists of a body with a central pin and a shell that needs to be soldered.
Soldering Steps:

Attach the Central Conductor:
Insert the exposed inner conductor of the RG-86 cable into the central pin of the SMA connector.
Heat the connection point with a soldering iron and apply solder to ensure a solid joint between the conductor and the pin.
Attach the Shield:
Fold back the shield of the RG-86 cable so that it makes contact with the connector’s grounding element or the connector body.
Heat the connection area and apply solder to secure the shield to the connector, ensuring good electrical grounding and shielding.
Final Steps:

Inspect the Connection: Check for any solder bridges or cold joints. Ensure that the solder joints are clean and secure.
Test the Connection: If possible, test the connection with RF equipment to ensure it performs well and maintains signal integrity.
Applications:
SMA Right-Angle to RG-86 Cable assemblies are commonly used in RF and communication systems where space is limited and a high-frequency connection is needed.
Right-angle connectors help in managing cable routing in compact or complex setups, minimizing strain on the cable and connector.