Sale!
TNC F BH LMR 100 CRIMP
TNC F BH LMR 100 CRIMP

TNC F BH LMR 100 CRIMP

₹112

  • Prepare the Cable:
    – Strip the Outer Jacket: Use a cable stripping tool to remove approximately 1/2 inch (or as specified by the connector manufacturer) of the outer jacket from the LMR 100 cable. Be careful not to damage the underlying braided shield.
    – Expose the Shielding: Pull back the braided shield to reveal the dielectric insulation. Trim any excess shielding so that it fits neatly inside the connector.
    – Strip the Dielectric: Strip the dielectric insulation to expose the center conductor. The length of the exposed center conductor should be approximately 1/8 to 1/4 inch, depending on the connector’s specifications.
  • Prepare the Connector:
    – Insert the Cable: Insert the prepared end of the LMR 100 cable through the bulkhead of the TNC female connector. Make sure the center conductor aligns with the center pin and the shield is positioned correctly to make contact with the connector’s outer part.
    – Align the Connector: Ensure that the TNC connector’s bulkhead is properly aligned with the mounting hole on your panel or enclosure.
  • Crimp the Connector:
    – Crimp the Ferrule: Use the crimping tool to crimp the ferrule or sleeve around the braided shield of the cable. This creates a solid mechanical connection between the shield and the connector. Make sure the crimp is even and secure.
    – Crimp the Center Pin: Insert the center conductor into the center pin of the connector. Use the crimping tool to crimp the center pin onto the center conductor. Ensure the conductor is fully inserted into the pin before crimping.
  • Mount the Connector:
    – Secure the Connector: Once crimped, secure the TNC bulkhead connector to the panel or enclosure using the provided mounting hardware. Make sure it is tightened properly to avoid movement or strain on the connection.
  • Assemble and Insulate (Optional):
    – Apply Heat Shrink Tubing: For additional insulation and strain relief, slide heat shrink tubing over the joint and apply heat to shrink it tightly around the connector and cable.
    – Inspect the Assembly: Check that the connector is securely attached, the ferrule and center pin are properly crimped, and there are no loose parts. Ensure that the center conductor and shield are properly connected.
  • Test the Connection:
    – Verify Connections: Ensure the connector is firmly attached and that there are no loose parts.
    – Test Signal: Use appropriate testing equipment to confirm that the connection is functioning correctly and that there are no signal issues.
Categories: , , Tag:

The TNC Female Bulkhead LMR 100 Crimp connector is designed for bulkhead mounting with a secure crimp attachment for LMR 100 coaxial cables. This connector supports RF applications with frequencies up to 11 GHz, ensuring minimal signal loss and reliable performance. The bulkhead design allows for secure installation in enclosures, making it suitable for demanding environments in telecommunications and wireless communication systems.

Tools and Materials Needed:
1. TNC Female Bulkhead Connector (Crimp Style)
2. LMR 100 Coaxial Cable
3. Cable Stripping Tool (suitable for LMR 100)
4. Crimping Tool (compatible with TNC connectors and LMR 100 cable)
5. Center Pin (usually included with the connector)
6. Heat Shrink Tubing (optional, for additional insulation and strain relief)
7. Soldering Iron (if needed for soldering the center conductor)

Weight 0.1 kg

Reviews

There are no reviews yet.

Be the first to review “TNC F BH LMR 100 CRIMP”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart